Home XP Booths Turn-key Solutions Enhanced Curing Reconditioned Booths Commercial Booths Exterior Booths Energy Efficiency Loans About Us News Case Study Photo Gallery Contact Us	The XP Range The XP range has been extensively developed and widely acclaimed by major paint manufacturers. The XP1200 is synonymous with high quality, cost efficiency and durability which now brings you the ultimate in automotive refinishing plant. Programmable Logic Controlled paint curing profiles provide the bodyshop with the ultimate profit enhancing tool - supported for its lifetime by Nationwide After-Sales Service organisation. One important criteria of the XP1200 was to design a spraybooth for water based paint systems rather than just putting a "blower system" in an existing design as in the case of nearly all it's competitors. Versatility XP1200 booths are available in varying sizes to accommodate individual bodyshop requirements. Extra length for car and panel painting, extra height for light commercial vehicles and main entry doors in three and four leaf configuration. Cabins are available in a range of colours to enhance your bodyshop colour scheme or promote your corporate image. Air Handling Air inlet and air extraction fans are factory balanced, backward curved centrifugal type. Directly driven by high efficiency motors with optional variable speed drive for ultimate control. Controls For optimum efficiency and reliability. The XP1200 range offers fully integrated Programmable Logic Controls (PLC) for all operating functions. A truly automatic system for individual paint processes. Controlling temperature to - or + 0.5°c. Construction Easily cleaned, solvent resistant, interlocking wall panel system. Doors, walls and ceiling fully insulated to conserve energy. Filters Full width ceiling filters to EU5 Din 24185, to insure inclusion free paint finishes. Lighting Superb lighting to 1200 lux by high frequency, electronic start T5 fluorescent system to give long lasting light where you need it most. Optional Enhanced Curing System For the rapid drying of water and the latest generation of water based paint products Multi directional air input nozzles by "Grada International" installed within "clean zones" at high level in booth Variable Speed Drive to air input fan to provide ultimate control of air velocity Independent selection of nozzles. It puts the extra high velocity air where you need it Can be retro-fitted into existing spraybooths Variable speed drive for ultimate control Ecosave System A spraybooth normally operates during the final preparation and masking stage, this warms the panel to be painted, during this operation our system automatically reduces the input fan speed by 60%. The cabin pressure is controlled by the extractor fan together with temperature are both operated by PID control within the Siemens PLC and VSD. The system, operates at this reduced level until the painter commences spraying, the system then returns to 100% and remains at that level until 3 minutes after the completion of the application before returning to the reduced level. Automatic pressure balancing without in-duct Automatic standby-mode to reduce running costs Dramatic reduction in running costs Multi-function selection for individual print processes 100% funding available under the terms of the Government's carbon trust and 100% enhanced capital allowance.

Home  ||  XP Booths  ||  Enhanced Curing  ||  Turn-key Solutions   ||  Reconditioned Booths  ||  Commercial Booths  ||  Exterior Booths

About Us  ||  Our Clients  ||  Photo Gallery  ||  Contact Us  ||  David Utting © 2008  ||  Site by ZoomZoom Ltd